Autoclave Engineers pipe fittings, P Series, are designed
for liquid and gas applications. Available from 1/4" to 1"
NPT to 15,000 psi and temperatures to 400°F (204°C)
NOTE: NPT (Pipe) Connections:
- NPT threads must be sealed using a high quality PTFE tape and/or
paste product. Refer to thread sealant manufacturer's instructions
on how to apply thread sealant.
- Sealing performance may vary based on many factors such as
pressure, temperature, media, thread quality, thread material,
proper thread engagement and proper use of thread sealant.
- Customer should limit the number of times an NPT fitting is
assembled and disassembled because thread deformation during
assembly will result in deteriorating seal quality over time. When
using only PTFE tape, consider using thread lubrication to prevent
galling of mating parts.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.