Corporate Home
Search Catalog
      GO   
 All Categories    Medium Pressure Tubing
View Cart View RFQs  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > High Pressure Fittings and Tubing > Medium Pressure Fittings and Tubing > Medium Pressure Tubing > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Medium Pressure Tubing

Check up to five results to perform an action.

Autoclave Engineers offers a complete selection of austenitic, cold drawn stainless steel tubing designed to match the performance standards of Autoclave valves and fittings. Autoclave medium pressure tubing is manufactured specifically for high pressure applications requiring both strength and corrosion resistance. The tubing is furnished in random lengths between 20 feet (6 meters) and 27 feet (8.2 meters). The average is 24 feet (7.3 meters). Medium Pressure Tubing is available in five sizes and a variety of materials.

Inspection and Testing
Autoclave Engineer’s high pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are controlled within close tolerances. Sample pieces of tubing for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 100% hydrostatic testing at additional cost if desired.

Special Materials
In addition to the type 316 and 304 stainless steel tubing listed in this section, Autoclave has limited stock of hard-to-obtain shorter lengths of the following tubing materials: Monel 400*, Inconel 600*, Titanium Grade 2*, Nickel 200*, Hastelloy C276* - (* Trademark names)

Please consult factory for stock available.

Note: Caution should be exercised in proper selection of Medium Pressure Tubing based on actual operating conditions. Two series available: 15000 psi (1034 bar) and 20000 psi (1379 bar).

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.




Compare Items Add To Cart Request Quote
   
  Results 1 - 12 of 12 1 

Item #

Tube Materials

Fits Connection Type

Outside Diameter Tube

Inside Diameter Tube

Wall Thickness Tube

Flow Area

MS15-092 316SS SF250CX 1/4 Inch
6.35
mm
0.109 Inch
2.77
mm
0.070 Inch
1.78
mm
0.009 in²
5.81
mm²
MS15-192 304SS SF250CX 1/4 Inch
6.35
mm
0.109 Inch
2.77
mm
0.070 Inch
1.78
mm
0.009 in²
5.81
mm²
MS15-093 316SS SF375CX 3/8 Inch
9.53
mm
0.203 Inch
5.16
mm
0.086 Inch
2.18
mm
0.032 in²
20.65
mm²
MS15-193 304SS SF375CX 3/8 Inch
9.53
mm
0.203 Inch
5.16
mm
0.086 Inch
2.18
mm
0.032 in²
20.65
mm²
MS15-085 316SS SF562CX 9/16 Inch
14.29
mm
0.312 Inch
7.92
mm
0.125 Inch
3.18
mm
0.076 in²
49.03
mm²
MS15-187 304SS SF562CX 9/16 Inch
14.29
mm
0.312 Inch
7.92
mm
0.125 Inch
3.18
mm
0.076 in²
49.03
mm²
MS15-097 316SS SF562CX 9/16 Inch
14.29
mm
0.359 Inch
9.12
mm
0.101 Inch
2.57
mm
0.101 in²
65.16
mm²
MS15-095 316SS SF750CX 3/4 Inch
19.05
mm
0.438 Inch
11.13
mm
0.156 Inch
3.96
mm
0.151 in²
97.42
mm²
MS15-098 316SS SF750CX 3/4 Inch
19.05
mm
0.516 Inch
13.11
mm
0.117 Inch
2.97
mm
0.209 in²
134.84
mm²
MS15-096 316SS SF1000CX 1 Inch
25.4
mm
0.562 Inch
14.27
mm
0.219 Inch
5.56
mm
0.248 in²
160.00
mm²
MS15-099 316SS SF1000CX 1 Inch
25.4
mm
0.688 Inch
17.48
mm
0.156 Inch
3.96
mm
0.371 in²
239.35
mm²
13041 316SS SF1500CX 1-1/2 Inch
38.10
mm
0.937 Inch
23.80
mm
0.281 Inch
7.15
mm
0.589 in²
444.88
mm²
  Results 1 - 12 of 12 1 

2012©All Rights Reserved • Parker Autoclave Engineers • Erie, PA USA