Autoclave Engineers High Flow Cup-Type Line Filters are recommended in high pressure systems requiring both high flow rates and maximum filter surface area. Widely used in the industrial and chemical processing fields, the cup design offers as much as six times the effective filter area as compared to disc-type units. In addition, the filter elements can be quickly and easily replaced.
Materials: 316 Stainless Steel: body, cover, cover gland. 300 Series Stainless Steel: filter element.
Filter Elements: 300 Series Stainless Steel sintered cup. Standard elements available in choice of 5, 35 or 65 micron sizes. Note: Filter ratings are nominal.
Note 1: All filters furnished complete with connection components unless specified without. All dimensions for reference only and subject to change.
Note 2: Autoclave Engineers disc and cup type filters are designed to filter small amounts of process particles. It is recommended that all fluids are thoroughly cleaned prior to entering the higher pressure system.
For optional materials, see Technical Information.
Note 3: Special material filters may be supplied with four flats in place of standard hex.
Note 4: Pressure differential not to exceed 1000 psi (69 bar) in a flowing condition.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.