CAD Cart (0)
  • Cart is empty

Provide unidirectional flow and tight shut-off for liquids and gases with high reliability. When differential drops below cracking pressure*, valve shuts off. (Not for use as relief valve.)

Materials: 316 Stainless Steel: body, cover, poppet and cover gland. 300 Series Stainless Steel: spring Standard O-ring: Viton, for operation to 500° F (260°C). Buna-N or Teflon available for 250°F (121°C) or 400°F (204°C) respectively; specify when ordering.

*Cracking Pressure: 20 psi (1.38 bar) ±30%. Springs for higher cracking pressures (up to 100 psi (6.89bar)) available on special order for O-ring style check valves only.

Caution: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf life may vary widely with differing service conditions, properties of reactants, pressure and temperature cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration, and O-rings replaced as required.

Caution: See Tubing section for proper selection of tubing.

Note: All check valves are furnished complete with connection components unless otherwise specified.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Fits Connection Type

Pressure Rating

Orifice

Rated Cv

Add To Cart/Request Quote
Sort by
N/A QS250 N/A 15000 psi1034.20 bar N/A 0.188 in4.78 mm N/A 0.15 Request Quote
N/A QS375 N/A 15000 psi1034.20 bar N/A 0.250 in6.35 mm N/A 0.63 Request Quote
N/A QS562 N/A 15000 psi1034.20 bar N/A 0.359 in9.12 mm N/A 2.30 Request Quote
N/A QS750 N/A 15000 psi1034.20 bar N/A 0.516 in13.11 mm N/A 4.70 Request Quote
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1