CAD Cart (0)
  • Cart is empty
Autoclave Engineers pipe fittings, P Series, are designed for liquid and gas applications. Available from 1/4" to 1" NPT to 15,000 psi and temperatures to 400°F (204°C)

NOTE: NPT (Pipe) Connections:
- NPT threads must be sealed using a high quality PTFE tape and/or paste product. Refer to thread sealant manufacturer's instructions on how to apply thread sealant.
- Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant.
- Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts.

For prompt service, Autoclave stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Connection Type

Pressure Rating

Minimum Opening

A - Typical Hex

B - Length

Add To Cart/Request Quote
Sort by
15F4488 N/A 1/4" NPT N/A 15.000 psi1034.20 bar N/A 0.42 in10.67 mm N/A 0.75 in19.05 mm N/A 1.50 in38.10 mm Request Quote
15F6688 N/A 3/8" NPT N/A 15.000 psi1034.20 bar N/A 0.56 in14.22 mm N/A 1 in24.40 mm N/A 1.63 in41.28 mm Request Quote
15F8888 N/A 1/2" NPT N/A 15.000 psi1034.20 bar N/A 0.69 in17.53 mm N/A 1.19 in30.23 mm N/A 2.00 in50.8 mm Request Quote
10F121288 N/A 3/4" NPT N/A 10.000 psi689.46 bar N/A 0.89 in22.61 mm N/A 1.38 in35.05 mm N/A 2.75 in69.90 mm Request Quote
10F161688 N/A 1" NPT N/A 10.000 psi689.46 bar N/A 1.13 in28.58 mm N/A 1.75 in44.50 mm N/A 2.50 in63.50 mm Request Quote
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1