CAD Cart (0)
  • Cart is empty

Prevent reverse flow where leak-tight shut-off is not mandatory. When differential drops below cracking pressure, valve closes. With all-metal components, valve can be used up to 1200°F (649°C). See Technical Information section for connection temperature limitations. (Not for use as a relief valve.)

Ball and poppet are an integral design to assure positive, in-line seating without “chatter”. Poppet is designed essentially for axial flow with minimum pressure drop.

Materials: 316 Stainless Steel: body, cover, cover gland, ball poppet, cover gland. 300 Series Stainless Steel: spring

Minimum operating temperature for standard ball check valves -110° (-79°C).
For low temperature option to -423°F (-252°C) add suffix LT (Low temperature spring).

Caution: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf life may vary widely with differing service conditions, properties of reactants, pressure and temperature cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration, and O-rings replaced as required.

Note: For optional material see Technical Information.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Fits Connection Type

Pressure Rating

Orifice

Rated Cv

Add To Cart/Request Quote
Sort by
N/A F1000C43 N/A 43000 psi2964.70 bar N/A 0.438 in11.13 mm N/A 4.30 Request Quote
N/A F250C N/A 60000 psi4136.79 bar N/A 0.094 in2.39 mm N/A 0.15 Request Quote
N/A F375C N/A 60000 psi4136.79 bar N/A 0.125 in3.18 mm N/A 0.28 Request Quote
N/A F562C N/A 60000 psi4136.79 bar N/A 0.187 in4.75 mm N/A 0.63 Request Quote
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1