Parker Hannifin Corporation
Parker Hannifin Corporation
Instrumentation Products Division
1005 A Cleaner Way
Huntsville, AL 35805 USA
Phone: +1 (256) 881-2040
Fax: +1 (256) 881-5072
Email: c-parker@parker.com
Website: www.parker.com
Print Back

High Pressure Valve Features:
  • Rising stem/barstock body design.
  • Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
  • PTFE encapsulated packing provides dependable stem and body sealing.
  • Solid, one-piece stem provides an economical valve for SOG service.
  • Optional non-rotating stem assembly available.
  • Stem and packing gland materials have been selected to optimize thread cycle life.
Autoclave valves are complemented by a complete line of high pressure fittings, tubing and check valves. All high pressure valves and fittings use Autclave’s high pressure coned-andthreaded connections for dependable performance under widely varying conditions.

The 30VM-SOGWO Series valves are furnished without collars and glands, unless otherwise specified.

Panel mounting drill size: 0.22" all valves.
All dimensions for reference only and subject to change.
For prompt service 'Autoclave stocks select products' Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Unit of Measure

Specifications

Pressure Rating at Room Temperature

 N/A 20000 psi1379 bar

Outside Diameter Tube

 N/A 9/16 in14.29 mm

Stem Type

 N/A VEE

Valve Pattern

 N/A 2-Way Angle

Connection Type

 N/A F562C

Orifice Diameter

 N/A 0.125 in3.18 mm

A - Width

 N/A 2.62 in66.55 mm

B - Length

 N/A 1.31 in33.27 mm

C - Length

 N/A 0.81 in20.57 mm

D - Height

 N/A 1.12 in28.45 mm

E - Height

 N/A 2.44 in61.98 mm

F - Length

 N/A 3.00 in76.20 mm

G - Packing Gland Mounting Hole Drill Size

 N/A 1.00 in25.40 mm

G1 - Bracket Mounting Hole Size

 N/A 0.28 in7.11 mm

H - Height

 N/A 5.06 in128.52 mm

M - Length

 N/A 0.69 in17.53 mm

N - Height

 N/A 0.38 in9.65 mm

Block Thickness

 N/A 1.50 in38.10 mm

Tubing Engagement Depth

 N/A 0.87 in22.0 mm

Rated Cv

 N/A 0.33

Valve Maintenance

N/A Repair Kits:
add "R" to the front of valve catalog number for proper repair kit. (Example: R30VM4001-SOGWO)

Valve Bodies:
Valve bodies are available. Order using the eight (8) digit part number found in the valve drawing or contact your Sales Representative for information.

Consult your Autoclave representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and Maintenance section for proper maintenance procedures.

Note: All sour service valves and fittings supplied without collars and glands unless otherwise specified.