Parker Hannifin Corporation
Parker Hannifin Corporation
Instrumentation Products Division
1005 A Cleaner Way
Huntsville, AL 35805 USA
Phone: +1 (256) 881-2040
Fax: +1 (256) 881-5072
Email: c-parker@parker.com
Website: www.parker.com
Print Back
Autoclave Engineers pipe fittings, P Series, are designed for liquid and gas applications. Available from 1/4" to 1" NPT to 15,000 psi and temperatures to 400°F (204°C)

NOTE: NPT (Pipe) Connections:
- NPT threads must be sealed using a high quality PTFE tape and/or paste product. Refer to thread sealant manufacturer's instructions on how to apply thread sealant.
- Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant.
- Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts.

For prompt service, Autoclave stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
P_ser_pipe_street_elbow
Unit of Measure
Items P_ser_pipe_street_elbow
SPL4400
Street Pipe Elbow 		P_ser_pipe_street_elbow
SPL6600
Street Pipe Elbow 		P_ser_pipe_street_elbow
SPL8800
Street Pipe Elbow 		P_ser_pipe_street_elbow
SPL12
Street Pipe Elbow 		P_ser_pipe_street_elbow
SPL16
Street Pipe Elbow
Connection Type N/A 1/4" NPT N/A 3/8" NPT N/A 1/2" NPT N/A 3/4" NPT N/A 1" NPT
Pressure Rating N/A 15.000 psi1034.20 bar N/A 15.000 psi1034.20 bar N/A 15.000 psi1034.20 bar N/A 10.000 psi689.46 bar N/A 10.000 psi689.46 bar
Minimum Opening N/A 0.219 in5.54 mm N/A 0.297 in7.54 mm N/A 0.359 in9.12 mm N/A 0.609 in14.47 mm N/A 0.765 in19.43 mm
A - Length N/A 1.50 in38.10 mm N/A 1.75 in44.75 mm N/A 2.25 in57.15 mm N/A 3.00 in76.20 mm N/A 4.12 in104.65 mm
B - Height N/A 1.50 in38.10 mm N/A 1.50 in38.10 mm N/A 2 in50.8 mm N/A 2.25 in57.15 mm N/A 2.50 in63.50 mm
C - Length N/A 1.13 in28.70 mm N/A 1.25 in31.75 mm N/A 1.63 in41.40 mm N/A 2.00 in50.80 mm N/A 2.69 in68.32 mm
D - Height N/A 1.00 in25.40 mm N/A 1.00 in25.40 mm N/A 1.25 in31.75 mm N/A 1.50 in38.10 mm N/A 1.75 in44.45 mm
Block Thickness N/A 0.75 in19.05 mm N/A 1.00 in25.40 mm N/A 1.25 in31.75 mm N/A 1.38 in34.93 mm N/A 1.75 in44.45 mm