Parker / Autoclave Engineers FCD - 2-Way Series Ball Valves

Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve styles, sizes, and process connections. Some of the more unique design innovations include an integral one-piece trunion mounted style ball and stem that eliminates the shear failure common in two piece designs, re-torqueable seat glands that result in longer seat life, and a low friction stem seal that reduces actuation torque and enhances cycle life.

These ball valves can also be modified to incorporate the use of special materials, seals for high temperature applications, subsea models, and valve actuators.

When it comes to high-pressure applications, these ball valves with the associated high-pressure components, provide the critical performance demanded by the high pressure market.

AE Ball Valve Features:

One-piece, trunion mounted style, stem design eliminates shear failure and reduces the effects of side loading found in two piece designs.
Re-torqueable seat glands for longer seat life.
PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion.
Full-port flow path minimizes pressure drop.
316 cold worked stainless steel construction.
Low friction pressure assisted graphite filled Teflon stem seal increases cycle life and reduces operating torque.
Quarter turn from open to close with positive stop.
Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C).
Optional o-rings available for high-temperature applications.
Optional wetted materials.
Wide selection of tube and pipe and fittings available.
Electric and pneumatic actuator options.

Applications:

Laboratories
Test Stands
Control Panels
Chemical Research
Pilot Plants
Water Blast Pumping Units
High volume chemical injection skids.

See ball valve option/details section for end connection details, material, and high temperature options.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Unit of Measure

Items	2B4S15L2 2-Way Series Ball Valves Request Quote	2B4S15L4 2-Way Series Ball Valves Request Quote	2B4S15L6 2-Way Series Ball Valves Request Quote	2B4S10L8 2-Way Series Ball Valves Request Quote	2B4S20M4 2-Way Series Ball Valves Request Quote
Orifice	N/A 1/4 in
End Connection Number	N/A L2	N/A L4	N/A L6	N/A L8	N/A M4
Connection Type	N/A W125	N/A SW250	N/A SW375	N/A SW500	N/A SF250CX20
MAWP at Room Temperature	N/A 15000 psi1034 bar	N/A 15000 psi1034 bar	N/A 15000 psi1034 bar	N/A 10000 psi690 bar	N/A 20000 psi1379 bar
Minimum Orifice	N/A 0.094 in2.39 mm	N/A 0.128 in3.25 mm	N/A 0.250 in6.35 mm	N/A 0.250 in6.35 mm	N/A 0.109 in2.77 mm
Seat Gland Hex	N/A 1.00 in25.40 mm
A - Height	N/A 4.33 in109.98 mm
B - Length	N/A 4.19 in106.43 mm
C - Width	N/A 2.00 in50.80 mm
D - Length	N/A 3.37 in85.60 mm
E - Length	N/A 3.90 in99.06 mm
F - Height	N/A 1.13 in28.70 mm
G - Spacing of Holes	N/A 1.50 in38.10 mm
H - Dimension	N/A 0.75 in19.05 mm
J - Dimension	N/A 0.43 in10.92 mm
K - Diameter	N/A 0.28 in7.11 mm
L - Height	N/A 1.91 in48.51 mm
Block Thickness	N/A 1.00 in25.40 mm
A - Panel Mounting Dimension	N/A 1.50 in38.10 mm
B - Panel Mounting Dimension	N/A 0.75 in19.05 mm
C - Panel Mounting Dimension	N/A 1.06 in26.92 mm
D - Panel Mounting Dimension	N/A 0.28 in7.11 mm
E - Panel Mounting Dimension	N/A
Valve Options	N/A Pneumatic Actuator AO - Air-to-open/spring to close AC - Air-to-close/spring to open AOC - Air-to-open-and-close (double action) Electric Actuator EO1 - 20 volt AC 50/60 Hz EO2 - 220 volt AC 50/60 Hz EO3 - 24 VDC Actuator Operating Temperature: Pneumatic: -20°F to 175°F (-29°C to 79°C) Electric: -20°F to 160°F (-29°C to 71°C) High Temperature Option: HT - for media temperature up to 500°F (260°C) See ball valve actuator section for full description, additional information, and options.
Valve Maintenance	N/A Repair Kits: add “R” to the front of valve catalog first 4 numbers for proper repair kit. (Example: R2B4S) Consult your Autoclave representative for pricing on repair kits. Refer to the Operation and Maintenance manual for proper maintenance procedures.