Print Back

Dual-Disc Line Filters are utilized in numerous industrial, chemical processing, aerospace, nuclear and other applications. With the dual-disc design, large contaminant particles are trapped by the upstream filter element before they can reach and clog the smaller micron-size downstream element. Filter elements can be easily replaced.

Materials: 316 Stainless Steel: Body, covers and gland nuts. Filters: 316L Stainless Steel.

Filter Elements: Downstream/upstream micron size 35/65 is standard. 5/10 or 10/35 also available when specified. Other element combinations available on special order.

Note 1: All filters furnished complete with connection components unless otherwise specified. All dimensions for reference only and subject to change.
For optional materials, see Technical Information.
Note 2: Autoclave Engineers disc and cup type filters are designed to filter small amounts of process particles. It is recommended that all fluids are thoroughly cleaned prior to entering the higher pressure system.
Note 3: Special material filters may be supplied with four flats in place of standard hex.
Note 4: Pressure differential not to exceed 1000 psi (69 bar) in a flowing condition.

The 1/16” Tubing System is a complete system for use with all 1/8” components for pressure to 15000 psi (1034 bar). Consult factory.

For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Unit of Measure

Specifications

Pressure Rating

N/A 15000 psi1034.19 bar

Orifice

N/A 0.125 in3.18 mm

Micron Size

N/A 5/10

Connection Size and Type

N/A SW375

Effective Filter Element Area

N/A 0.15 in²96.77 mm²

A - Length

N/A 2.94 in75.56 mm

B - Length

N/A 1.68 in42.67 mm

C - Length

N/A 0.53 in13.46 mm

D - Typical Hex

N/A 0.75 in19.05 mm

HEX

N/A 1.00 in25.40 mm

Tubing Engagement Depth

N/A 0.75 in19.1 mm