Parker Hannifin Corporation
Parker Hannifin Corporation
Instrumentation Products Division
1005 A Cleaner Way
Huntsville, AL 35805 USA
Phone: +1 (256) 881-2040
Fax: +1 (256) 881-5072
Email: c-parker@parker.com
Website: www.parker.com
Print Back
Autoclave Engineers manufactures high pressure fittings for both standard oil field service where H2S is not present and type SOGWO for service where H2S is present. Utilizing Autoclave high pressure coned-and-threaded connections, the SOGWO fittings detailed on this page are correlated for use with series 30VM-SOGWO and 60VM-SOGWO valves. Standard service fittings are correlated for use with series 30VM and 60VM valves. For complete information on standard service fittings, refer to Fitting and Tubing High Pressure Section.

Note: All sour oil and gas valves and fittings supplied without collars and glands unless otherwise specified.

Note: Fittings such as 45° elbows, reducer elbows, and reducer 45° elbows are available upon request. For mounting hole option add suffix PM to catalog number, consult factory for mounting hole dimensions. Contact your local sales representative for additional information.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
SOGWO_Cross
Unit of Measure
Items SOGWO_Cross
CX4444-SOGWO
Sour Service Cross Fittings 		SOGWO_Cross
CX6666-SOGWO
Sour Service Cross Fittings 		SOGWO_Cross
CX9999-SOGWO
Sour Service Cross Fittings
Connection Type N/A F250C N/A F375C N/A F562C
Outside Diameter Tube N/A 6.35 mm1/4 in N/A 9.53 mm3/8 in N/A 14.29 mm9/16 in
Pressure Rating N/A 30000 psi2068.39 bar
Minimum Opening N/A 0.094 in2.39 mm N/A 0.125 in3.18 mm N/A 0.188 in4.78 mm
A - Height N/A 1.25 in31.75 mm N/A 2.12 in53.85 mm N/A 2.75 in69.85 mm
B - Width N/A 2.00 in50.80 mm N/A 2.00 in50.80 mm N/A 2.62 in66.55 mm
C - Height N/A 0.50 in12.70 mm N/A 0.53 in13.46 mm N/A 0.81 in20.57 mm
D - Typical Hex N/A 0.63 in16.00 mm N/A 0.81 in20.57 mm N/A 1.19 in30.23 mm
E - Length N/A 0.62 in15.75 mm N/A 1.06 in26.92 mm N/A 1.38 in35.05 mm
F - Length N/A 1.00 in25.40 mm N/A 1.00 in25.40 mm N/A 1.31 in33.27 mm
Block Thickness N/A 1.00 in25.40 mm N/A 1.00 in25.40 mm N/A 1.50 in38.10 mm
Tubing Engagement Depth N/A 0.50 in12.7 mm N/A 0.69 in17.5 mm N/A 0.87 in22.0 mm