(5)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(2)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(2)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(16)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(15)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(10)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(10)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Note: NPT (Pipe) connections
NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
(20)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Note: NPT (Pipe) connections
NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
(9)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Note: NPT (Pipe) connections
NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
(20)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(9)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(7)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.ADPT_15MAM16J12_FRONT.jpg
(16)Autoclave Engineer’s standard male-to-male one piece adapters
are available in low, medium, and high pressure configurations.
Standard male-to-male adapters are machined from
cold worked stainless steel. Other materials are available upon
request. Contact your local Sales Representative for optional
information. The following tables list our standard adapters
with dimensions.
Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Note: NPT (Pipe) connections
NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturer’s instructions
on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
