Standard length Tubing Nipples to 150000 psi (10342 bar).
Standard coned and threaded nipples 1/4" to 1" in lengths from 2.75" (69.9 mm) to 12.0" (304.8 mm)
O-ring and Ball Check Valves, and Excess Flow Valves to 60000 psi (4137 bar).
Check valves to provide unidirectional flow with back flow shut-off for liquids of gases. Excess flow valves available in ball design for surge protection.
Dual-Disc and Cup Filters to 60000 psi (4137 bar).
Dual-Disc filters used to trap larger particles in first filter to prevent clogging of smaller filter. Cup filters are used for high flow rates and provide maximum filter area.
Series KCGL, KCBGL, and, KCBGLX Anti-Vibration Assemblies
Anti-Vibration assemblies for medium pressure connections from 1/4" to 1" sizes. Used in extreme conditions of vibrations and/or shock in tubing systems, such as an unsupported line near a compressor.
Elbows, Tees, Crosses, Couplings, and Bulkheads to 150000 psi (10342 bar).
Autoclave's high pressure coned and threaded fittings for use with 1/4" to 1" tubing rated to 150000 psi (10342 bar).
Autoclave Engineers offers a complete selection of austenitic, cold drawn stainless steel tubing designed to match the performance standards of Autoclave valves and fittings. Autoclave high pressure tubing is manufactured specifically for high pressure applications requiring both strength and corrosion resistance. The tubing is furnished in random lengths between 20 feet (6 meters) and 27 feet (8.2 meters). The average is 24 feet (7.3 meters). High pressure tubing is available in five sizes and a variety of materials. Special longer lengths are available. Consult factory.
Inspection and Testing
Autoclave Engineer’s high pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are controlled within close tolerances. Sample pieces of tubing for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 100% hydrostatic testing at additional cost if desired.
Special Materials
In addition to the type 316 and 304 stainless steel tubing listed in this section, Autoclave has limited stock of hard-to-obtain shorter lengths of the following tubing materials in some sizes: Monel 400*, Inconel 600*, Titanium Grade 2*, Nickel 200*, Hastelloy C276* - (* Trademark names)
Please consult factory for stock availabilty.
Note:
1. Autofrettaged tubing available (see technical Information section: Pressure Cycling for Autofrettage information)
2. For HighPressure, High Cycle (HPHC) tubing, MS15-201, MS15-202, MS15-209, and MS15-210 are available. (See Technical Information section: Pressure Cycling for additional information)
All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
