Print Back
Autoclave Engineer’s standard male-to-male one piece adapters are available in low, medium, and high pressure configurations. Standard male-to-male adapters are machined from cold worked stainless steel. Other materials are available upon request. Contact your local Sales Representative for optional information. The following tables list our standard adapters with dimensions.

Note: Special material one piece adapters may be supplied with four flats in place of standard hex.

All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Male-Male-Adapters
Male-Male-Adapters-HP-RHP_dimension
Unit of Measure
1 

Item #

Connection H/P

Connection RH

A - Hex

B - Length

30MAH4RH16 N/A F250C N/A 1-12 in N/A 1 in25.4 mm N/A 2.13 in54.0 mm
30MAH6RH16 N/A F375C N/A 1-12 in N/A 1 in25.4 mm N/A 2.25 in57.1 mm
30MAH9RH16 N/A F562C N/A 1-12 in N/A 1.19 in30.1 mm N/A 2.69 in68.2 mm
30MAH4RH12 N/A F250C N/A 3/4-16 in N/A 0.81 in20.6 mm N/A 1.88 in47.6 mm
30MAH6RH12 N/A F375C N/A 3/4-16 in N/A 0.81 in20.6 mm N/A 2.06 in54.0 mm
30MAH9RH12 N/A F562C N/A 3/4-16 in N/A 1.19 in30.1 mm N/A 2.50 in63.50 mm
60MAH4RH9 N/A F250C N/A 9/16-18 in N/A 0.63 in15.9 mm N/A 1.56 in39.7 mm
60MAH6RH9 N/A F375C N/A 9/16-18 in N/A 0.81 in20.6 mm N/A 1.94 in49.1 mm
60MAH9RH9 N/A F562C N/A 9/16-18 in N/A 1.19 in30.1 mm N/A 2.38 in60.3 mm
Unit of Measure
1