Print Back
Autoclave Engineer’s male-to-male JIC one-piece adapters are available in low, medium, and high pressure configurations. JIC adapters are machined from cold worked stainless steel. Other materials are available upon request. Contact your local Sales Representative for optional information. The following tables list our standard adapters with dimensions.

Note: Special material one piece adapters may be supplied with four flats in place of standard hex.

All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Male-Male-JIC-Adapters
Male-Male-JIC-Adapters-HP-JIC_dimension
Unit of Measure
Items Male-Male-JIC-Adapters
20MAH4J4
High-Pressure to JIC Adapters
Male-Male-JIC-Adapters
20MAH4J6
High-Pressure to JIC Adapters
Male-Male-JIC-Adapters
20MAH4J8
High-Pressure to JIC Adapters
Male-Male-JIC-Adapters
20MAH6J4
High-Pressure to JIC Adapters
Male-Male-JIC-Adapters
20MAH6J6
High-Pressure to JIC Adapters
Connection H/P N/A F250C N/A F250C N/A F250C N/A F375C N/A F375C
Connection JIC N/A 1/4 in N/A 3/8 in N/A 1/2 in N/A 1/4 in N/A 3/8 in
A - Hex N/A 0.75 in19.1 mm N/A 0.81 in20.6 mm N/A 1 in25.4 mm N/A 0.81 in20.6 mm N/A 0.81 in20.6 mm
B - Length N/A 1.63 in41.3 mm N/A 1.63 in41.3 mm N/A 1.88 in47.6 mm N/A 1.94 in49.1 mm N/A 1.94 in49.1 mm