Print Back
Autoclave Engineer’s standard male-to-male one piece adapters are available in low, medium, and high pressure configurations. Standard male-to-male adapters are machined from cold worked stainless steel. Other materials are available upon request. Contact your local Sales Representative for optional information. The following tables list our standard adapters with dimensions.

Note: Special material one piece adapters may be supplied with four flats in place of standard hex.

All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Male-Male-Adapters
Male-Male-Adapters-MP-HP_dimension
Unit of Measure
Items Male-Male-Adapters
20MAM4H4
Medium-Pressure to High-Pressure Adapters
Male-Male-Adapters
20MAM4H6
Medium-Pressure to High-Pressure Adapters
Male-Male-Adapters
20MAM4H9
Medium-Pressure to High-Pressure Adapters
Male-Male-Adapters
20MAM6H4
Medium-Pressure to High-Pressure Adapters
Male-Male-Adapters
20MAM6H6
Medium-Pressure to High-Pressure Adapters
Connection M/P N/A SF250CX N/A SF250CX N/A SF250CX N/A SF375CX N/A SF375CX
Connection H/P N/A F250C N/A F375C N/A F562C N/A F250C N/A F375C
A - Hex N/A 0.63 in15.9 mm N/A 0.81 in20.6 mm N/A 1.19 in30.1 mm N/A 0.63 in15.9 mm N/A 0.81 in20.6 mm
B - Length N/A 1.75 in44.5 mm N/A 2.13 in54.0 mm N/A 2.63 in66.7 mm N/A 1.94 in49.2 mm N/A 2.38 in60.3 mm