Print Back
All Autoclave Engineers valves and fittings are supplied complete with appropriate glands and compression sleeves.To order these components separately, use order numbers listed. When using plug, sleeve is not required.

All dimensions for reference only and subject to change.
For prompt service 'Autoclave stocks select products' Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Tee_Low
Unit of Measure
Items Tee_Low
MTE1110
Low Pressure Tee Fittings
Tee_Low
MTE2220
Low Pressure Tee Fittings
Connection Type N/A W062 N/A W125
Outside Diameter Tube N/A 1.59 mm1/16 in N/A 3.18 mm1/8 in
Pressure Rating N/A 15000 psi1034.20 bar
Minimum Opening N/A 0.055 in1.40 mm N/A 0.093 in2.36 mm
A - Height N/A 1 in25.4 mm
B - Width N/A 1.38 in34.93 mm
C - Height N/A 0.31 in7.87 mm
D - Typical Hex N/A 0.38 in9.65 mm
E - Length N/A 0.69 in17.45 mm
F - Length N/A 0.69 in17.45 mm
Block Thickness N/A 0.56 in14.27 mm
Tubing Engagement Depth N/A 0.47 in11.9 mm