Print Back
Autoclave series 6DB double block valve is a two-stem ball valve providing an economical and convenient method of blocking and bleeding in applications such as pressure monitoring and test, chemical injection and drain line isolation. This full port quarter turn double ball valve is designed for operation up to 15,000 psi (1034 bar).

Double Block and Bleed Features:
  • One piece, trunion mounted stem design eliminates shear failure and reduces the effects of side loading found in two piece designs.
  • Re-torqueable seat glands for longer seat life.
  • Carbon filled PEEK seats offer excellent resistance to chemicals, heat and wear/abrasion.
  • Vee-stem vent valve.
  • Full-port flow path minimizes pressure drop.
  • 316 cold worked stainless steel construction.
  • Low friction pressure assisted graphite filled Teflon stem seal increases cycle life and reduces operating torque.
  • Quarter turn from open to close with positive stop.
  • Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C).
Autoclave valves are complemented by a complete line of fittings, tubings and accessories. The 6DB Series is available with various connections and options.
Ball-Valves_6DB-Series
Unit of Measure
Items Ball-Valves_6DB-Series
6DB10L8P4
6DB Series Ball Valves
Ball-Valves_6DB-Series
6DB15M6M4
6DB Series Ball Valves
Ball-Valves_6DB-Series
6DB15M9M4
6DB Series Ball Valves
Ball-Valves_6DB-Series
6DB15M12M4
6DB Series Ball Valves
Ball-Valves_6DB-Series
6DB15P4P4
6DB Series Ball Valves
End Connection Number N/A L8 N/A M6 N/A M9 N/A M12 N/A P4
Connection Type N/A SW500 N/A SF375CX20 N/A SF562CX20 N/A SF750CX20 N/A 1/4 NPT
MAWP at Room Temperature N/A 10000 psi690 bar N/A 15000 psi1034 bar N/A 15000 psi1034 bar N/A 15000 psi1034 bar N/A 15000 psi1034 bar
Minimum Orifice N/A 0.328 in8.33 mm N/A 0.203 in5.16 mm N/A 0.312 in7.92 mm N/A 0.328 in8.33 mm N/A 0.328 in8.33 mm
Vent Connection Number N/A P4 N/A M4 N/A M4 N/A M4 N/A P4
Vent Connection N/A 1/4 NPT N/A SF250CX20 N/A SF250CX20 N/A SF250CX20 N/A 1/4 NPT
Seat Gland Hex N/A 1.38 in35.05 mm
A - Height N/A 7.14 in181.36 mm
B - Length N/A 8.81 in223.77 mm
C - Width N/A 6.00 in152.40 mm
D - Length N/A 1.5 in38.1 mm
E - Length N/A 12.94 in328.68 mm
F - Height N/A 1.38 in35.05 mm
G - Spacing of Holes N/A 5.00 in127.00 mm
H - Dimension N/A 3 in76.20 mm
J - Dimension N/A 0.41 in10.41 mm
K - Diameter N/A 0.28 in7.11 mm
L - Height N/A 3.19 in81.03 mm
M - Height N/A 2.38 in60.45 mm
N - Length N/A 0.65 in16.51 mm
O - Dimension N/A 0.5 in12.70 mm
Block Thickness N/A 1.75 in44.45 mm
Valve Options N/A High Temperature Option:
HT - for media temperature up to 500°F (260°C)

See ball valve options/details for full description, connectiondetails and high temperature options.

For material options consult factory.
N/A High Temperature Option:
HT - for media temperature up to 500°F (260°C)

See ball valve options/details for full description, connection details and high temperature options.

For material options consult factory.
N/A High Temperature Option:
HT - for media temperature up to 500°F (260°C)

See ball valve options/details for full description, connection details and high temperature options.

For material options consult factory.
N/A High Temperature Option:
HT - for media temperature up to 500°F (260°C)

See ball valve options/details for full description, connection details and high temperature options.

For material options consult factory.
N/A High Temperature Option:
HT - for media temperature up to 500°F (260°C)

See ball valve options/details for full description, connection details and high temperature options.

For material options consult factory.
Valve Maintenance N/A Consult your Autoclave representative for pricing on repair kits. Refer to the Operation and Maintenance manual for proper maintenance procedures.