Parker Hannifin Corporation
Parker Hannifin Corporation
Instrumentation Products Division
1005 A Cleaner Way
Huntsville, AL 35805 USA
Phone: +1 (256) 881-2040
Fax: +1 (256) 881-5072
Email: c-parker@parker.com
Website: www.parker.com
Print Back
Autoclave Engineers offers a complete selection of annealed, seamless stainless steel tubing designed to match the performance standards of Autoclave low pressure valves and fittings. Autoclave low pressure tubing is furnished in random lengths between 20 feet (6 meters) and 27 feet (8.2 meters). The average is 24 feet (7.3 meters). The tubing is available in five sizes and a variety of materials. In order to ensure proper sleeve “bite” into tubing, Autoclave Engineers specifies and controls the strength levels of both the tube and sleeve materials.

Inspection and Testing
Autoclave Engineers low pressure tubing is inspected for compliance with specified defect restrictions as well as carburization or intergranular carbide precipitation. The tubing outside diameter and wall thickness is controlled within close tolerance to assure proper fit. Sample pieces of tube (for each lot) are tested to confirm mechanical properties for proper compression sleeve “bite” and pressure capability. Furthermore, the sample tubes are pressure tested as a final check.

Special Materials
In addition to the type 316 and 304 stainless steel tubing listed in this section, Autoclave has a limited stock of hard-to-obtain shorter lengths of the following tubing materials:
Monel 400*, Inconel 600*, Titanium Grade 2*, Nickel 200*, Hastelloy C276* - (* Trademark names)

Please consult factory for stock available.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Low Pressure Tubing Section

Unit of Measure

Specifications

Tube Materials

 N/A 316SS

Fits Connection Type

 N/A W125

Outside Diameter Tube

 N/A 1/8 in3.18 mm

Tolerance/Outside Diameter

 N/A .128/.125 in3.25/3.18 mm

Inside Diameter Tube

 N/A 0.052 in1.32 mm

Wall Thickness Tube

 N/A 0.036 in0.91 mm

Flow Area

 N/A 0.002 in²1.29 mm²

Working Pressure at 0 - 100°F (-17.8 to 37.8°C)

 N/A 15000 psi1034.20 bar

Working Pressure at 200°F (93°C)

 N/A 15000 psi1034.20 bar

Working Pressure at 400°F (204°C)

 N/A 14400 psi992.83 bar

Working Pressure at 600°F (316°C)

 N/A 13600 psi937.67 bar

Working Pressure at 650°F (343°C)

 N/A 12600 psi868.73 bar