Item # 10P16071, P Series Pipe Low Pressure Needle Valves On Parker / Autoclave Engineers FCD

Pipe Valve Features:

P Series valve design provides in-line pipe connections for 1/4” to 1” pipe sizes.1/8 connections offset.
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling (1/8" NPT rotating stem design).
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE (Teflon) encapsulated packing provides dependable stem and body sealing.
Stem

Unit of Measure

Pressure Rating at Room Temperature	N/A 10000 psi690 bar
Pipe Size	N/A 1 in25.4 mm
Stem Type	N/A VEE
Valve Pattern	N/A 2-Way Straight
Connection Type	N/A Pipe
Orifice Diameter	N/A 0.562 in14.27 mm
A - Width	N/A 4.12 in104.65 mm
B - Length	N/A 2.06 in52.32 mm
D - Height	N/A 3.31 in84.07 mm
E - Height	N/A 4.62 in117.35 mm
F - Length	N/A 10.25 in260.35 mm
G - Packing Gland Mounting Hole Drill Size	N/A 1.62 in41.15 mm
G₁ - Bracket Mounting Hole Size	N/A 0.56 in14.22 mm
H - Height	N/A 9.00 in228.60 mm
M - Length	N/A 1.25 in31.75 mm
N - Height	N/A 1.13 in28.70 mm
Block Thickness	N/A 1.75 in44.45 mm
Rated C_v	N/A 4.40

N/A Extreme Temperatures
Standard Autoclave valves with Teflon packing may be operated to 450°F (232°C).High temperature packing and/or extended stuffing box are available for service from 0°F (-17.8°C) to 650°F (343°C) by adding the following suffixes to catalog order number.†
TG - standard valve with Teflon glass packing to 600°F (316°C).
GY - standard valve with graphite braided yarn packing to 650°F (343°C).
B - standard valve with cryogenic trim material and Teflon packing to -100°F (-73°C).

†Autoclave Engineers does not recommend pipe connections below 0°F (-17.8°C) or above 400°F (204°C). For additional valve options, contact your Sales Representative.

N/A Repair Kits:
add “R” to the front of valve catalog number for proper repair kit. (Example: R15P4071 or R10P12071)

Valve Bodies:
Valve bodies are available. Order using the eight (8) digit part number found on the valve drawing or contact your Sales Representative for information.

Consult your Autoclave representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and Maintenance section for proper maintenance procedures.

Email ^*
First Name ^*
Last Name ^*
Company ^*
City ^*
Zip/Postal Code ^*
Country ^*
Phone Number ^*
Project/Facility/Location Name
Project Timing ^*

Pressure Rating at Room Temperature

Pipe Size

Stem Type

Valve Pattern

Connection Type

Orifice Diameter

A - Width

B - Length

D - Height

E - Height

F - Length

G - Packing Gland Mounting Hole Drill Size

G1 - Bracket Mounting Hole Size

H - Height

M - Length

N - Height

Block Thickness

Rated Cv

G₁ - Bracket Mounting Hole Size

Rated C_v