CAD Cart (0)
  • Cart is empty
  • Dual-Disc-Line-Filters_Low


    Autoclave Engineers Dual-Disc Line Filters are utilized in numerous industrial, chemical processing, aerospace, nuclear and other applications. With the dual-disc design, large contaminant particles are trapped by the upstream filter element before they can reach and clog the smaller micron-size downstream element. Filter elements can be easily replaced.

    Materials: 316 Stainless Steel: body, cover, cover gland. 300 Series Stainless Steel: filter elements.

    Filter Elements: Downstream/upstream micron size 35/65 is standard. 5/10 or 10/35 also available when specified. Other element combinations available on special order.

    Note 1: All filters furnished complete with connection components unless otherwise specified. All dimensions for reference only and subject to change.
    For optional materials, see Technical Information.
    Note 2: Autoclave Engineers disc and cup type filters are designed to filter small amounts of process particles. It is recommended that all fluids are thoroughly cleaned prior to entering the higher pressure system.
    Note 3: Special material filters may be supplied with four flats in place of standard hex.
    Note 4: Pressure differential not to exceed 1000 psi (69 bar) in a flowing condition.

    For prompt service, Autoclave stocks select products. Consult your local representative.
    All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

  • Cup-Type-Line-Filters_Low


    Autoclave Engineers High Flow Cup-Type Line Filters are recommended in high pressure systems requiring both high flow rates and maximum filter surface area. Widely used in the industrial and chemical processing fields, the cup design offers as much as six times the effective filter area as compared to disc-type units. In addition, the filter elements can be quickly and easily replaced.

    Materials: 316 Stainless Steel: body, cover, cover gland. 300 Series Stainless Steel: filter element.

    Filter Elements: 300 Series Stainless Steel sintered cup. Standard elements available in choice of 5, 35 or 65 micron sizes. Note: Filter ratings are nominal.

    Note 1: All filters furnished complete with connection components unless otherwise specified. All dimensions for reference only and subject to change.
    For optional materials, see Technical Information.
    Note 2: Autoclave Engineers disc and cup type filters are designed to filter small amounts of process particles. It is recommended that all fluids are thoroughly cleaned prior to entering the higher pressure system.
    Note 3: Special material filters may be supplied with four flats in place of standard hex.
    Note 4: Pressure differential not to exceed 1000 psi (69 bar) in a flowing condition.

    For prompt service, Autoclave stocks select products. Consult your local representative.
    All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.