Corporate Home
Search Catalog
      GO   
 All Categories    Medium Pressure Anti-Vibration Collet Gland Assembly
View Cart View RFQs  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > High Pressure Fittings and Tubing > Medium Pressure Fittings and Tubing > Medium Pressure Anti-Vibration Collet Gland Assembly > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Medium Pressure Anti-Vibration Collet Gland Assembly

Check up to five results to perform an action.

Series KCBGLX - Sizes to 1-1/2” (38.10 mm), Pressures to 20000 (1379 bar)

For extreme conditions of vibration and/or shock in tubing systems, such as an unsupported line near a compressor, coned and-threaded connections are offered with the Autoclave antivibration collet gland assembly. Completely interchangeable with standard Autoclave Engineers medium pressure connections, the collet gland assembly provides equally effective pressure handling capability.

In standard connection systems, the bending stresses on the threaded area of the tubing imposed by excessive vibration or movement may cause premature fatigue failure of the tubing at the back of the thread. By moving the stress concentration back to the unthreaded part of the tubing and providing a wedge-type gripping action, the Autoclave Engineers anti-vibration collet gland assembly strengthens the entire structure. With stress concentration reduced and overall stress level maintained well below the endurance limit of the material, the result is virtually unlimited vibrational fatigue life.

A less complex and more economical design than other vibration-resistant connections, the collet gland assembly utilizes the same coned-and-threaded features of Autoclave medium pressure connections. Series KCBGLX extends the gland nut to provide room for the tapered slotted collet. The design provides a slight difference in angles between the collet and the corresponding taper of the gland nut. As the nut is tightened, it acts to wedge the tapered end of the collet into a gripping engagement with the tubing.

Materials Type 316 stainless steel with bonded dry film (316 MC) moly lubricant.
Note: Special material assemblies may be supplied with four flats in place of standard hex.

Standard Autoclave Engineers collar not included in complete assembly.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.




Compare Items Add To Cart Request Quote
   
  Results 1 - 24 of 24 1 

Item #

Part

Outside Diameter Tubing Size

CAD

KCBGLX40-316MC Complete assembly 1/4 Inch
6.35
mm
CAD Icon (for items table)
KCBLX40-316MC Collet body 1/4 Inch
6.35
mm
N/A
KCCLX40-316MC Slotted collet 1/4 Inch
6.35
mm
N/A
KGLX40-316MC Gland nut 1/4 Inch
6.35
mm
N/A
KCBGLX60-316MC Complete assembly 3/8 Inch
9.53
mm
CAD Icon (for items table)
KCBLX60-316MC Collet body 3/8 Inch
9.53
mm
N/A
KCCLX60-316MC Slotted collet 3/8 Inch
9.53
mm
N/A
KGLX60-316MC Gland nut 3/8 Inch
9.53
mm
N/A
KCBGLX90-316MC Complete assembly 9/16 Inch
14.29
mm
CAD Icon (for items table)
KCBLX90-316MC Collet body 9/16 Inch
14.29
mm
N/A
KCCLX90-316MC Slotted collet 9/16 Inch
14.29
mm
N/A
KGLX90-316MC Gland nut 9/16 Inch
14.29
mm
N/A
KCBGLX120-316MC Complete assembly 3/4 Inch
19.05
mm
CAD Icon (for items table)
KCBLX120-316MC Collet body 3/4 Inch
19.05
mm
N/A
KCCLX120-316MC Slotted collet 3/4 Inch
19.05
mm
N/A
KGLX120-316MC Gland nut 3/4 Inch
19.05
mm
N/A
KCBGLX160-316MC Complete assembly 1 Inch
25.4
mm
CAD Icon (for items table)
KCBLX160-316MC Collet body 1 Inch
25.4
mm
N/A
KCCLX160-316MC Slotted collet 1 Inch
25.4
mm
N/A
KGLX160-316MC Gland nut 1 Inch
25.4
mm
N/A
KCBGLX240-316MC Complete assembly 1-1/2 Inch
38.10
mm
CAD Icon (for items table)
KCBLX240-316MC Collet body 1-1/2 Inch
38.10
mm
N/A
KCCLX240-316MC Slotted collet 1-1/2 Inch
38.10
mm
N/A
KGLX240-316MC Gland nut 1-1/2 Inch
38.10
mm
N/A
  Results 1 - 24 of 24 1 

2012©All Rights Reserved • Parker Autoclave Engineers • Erie, PA USA