CAD Cart (0)
  • Cart is empty
Autoclave Engineers Pressure Snubbers provide protection to gauges and instrumentation from pressure surges, pulsation and shock. The unique snubber design provides superior instrument protection while not compromising instrument accuracy or reaction time. This is accomplished by the use of existing technology from our excess flow check valve with additional design features.

When sudden flow is seen, the poppet will rise, blocking the pressure surge and a small bleed hole in the poppet will allow pressure to slowly equalize. When the pressure is equalized, the poppet will then drop back down allowing normal flow to the gauge. A filter is used to prevent the hole in the plug from becoming plugged. The snubber must be mounted in the vertical position as indicated on the unit.

Snubbers are offered in 316SS as standard, with either male, female or male/female connections in 1/4" and 3/8" sizes. Optional materials available upon request.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Pressure Rating

A - Length

B - Length

C - Length

D - Hex

HEX

Add To Cart/Request Quote
Sort by
N/A 60000 psi4137 bar N/A 3.36 in85.34 mm N/A 2.50 in63.50 mm N/A 0.50 in12.70 mm N/A 0.63 in16.00 mm N/A 1.19 in30.15 mm Request Quote
N/A 60000 psi4137 bar N/A 4.05 in102.87 mm N/A 2.50 in63.50 mm N/A 0.50 in12.70 mm N/A 0.63 in16.00 mm N/A 1.19 in30.15 mm Request Quote
N/A 60000 psi4137 bar N/A 3.68 in93.47 mm N/A 2.13 in54.1 mm N/A 1.50 in38.10 mm N/A 0.75 in19.05 mm N/A 1.19 in30.15 mm Request Quote
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1