CAD Cart (0)
  • Cart is empty
Autoclave Engineer’s standard male-to-male one piece adapters are available in low, medium, and high pressure configurations. Standard male-to-male adapters are machined from cold worked stainless steel. Other materials are available upon request. Contact your local Sales Representative for optional information. The following tables list our standard adapters with dimensions.

Note: Special material one piece adapters may be supplied with four flats in place of standard hex.

All Dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Note: NPT (Pipe) connections
  • NPT threads must be sealed using a high quality PTFE tape and/or PTFE paste product. Refer to thread sealant manufacturer’s instructions on how to apply thread sealant.
  • Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant.
  • Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts.
Unit of Measure

Connection H/P

N/A F562C

Connection NPT

N/A 1/4 in

A - Hex

N/A 1.19 in30.1 mm

B - Length

N/A 2.63 in66.7 mm