Corporate Home
Search Catalog
      GO   
 All Categories    10V Series Low Pressure Needle Valves
View Cart View RFQs  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > High Pressure Needle Valves > Low Pressure Valves > 10V Series Low Pressure Needle Valves > Item # 10V4082  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Item # 10V4082, 10V Series Low Pressure Needle Valves




Low Pressure Valve Features:
  • 10V Series valve design provides in-line tube connections for 1/4" to 1/2" tube sizes.
  • Tubing sizes from 1/8" to 1/2".
  • Rising stem/barstock body design.
  • Non-rotating stem prevents stem/seat galling.
  • Metal-to-metal seating achieves bubble-tight shut- off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
  • PTFE (Teflon) encapsulated packing provides dependable stem and body sealing.
  • Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque.
  • Choice of Vee or Regulating stem tips.
  • Available in five body patterns.
Autoclave valves are complemented by a complete line of low pressure fittings, tubing, check valves and line filters. The 10V series use Autoclave’s SpeedBite connection. This single-ferrule compression sleeve connection delivers fast, easy make-up and reliable bubble-tight performance in liquid or gas service.

10V Series valves are furnished complete with connection components, unless otherwise specified.

Panel mounting drill size: 0.22" all valves.
All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult factory.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
When ordering glands separately for 10V Series 1/4" and 3/8" valves, subtitute 10N for SMN.





 Specifications   

Pressure Rating at Room Temperature

View
15000 psi
1034
bar

Outside Diameter Tube

1/4 Inch
6.35
mm

Stem Type

REG

Valve Pattern

2-Way Angle

Connection Type

SW250

Orifice Diameter

0.125 Inch
3.18
mm

A - Width

2.00 Inch
50.80
mm

B - Length

1.00 Inch
25.40
mm

C - Length

0.56 Inch
14.20
mm

D - Height

1.19 Inch
30.23
mm

E - Height

2.19 Inch
55.63
mm

F - Length

3.00 Inch
76.20
mm

G - Packing Gland Mounting Hole Drill Size

0.97 Inch
24.64
mm

G1 - Bracket Mounting Hole Size

0.22 Inch
5.59
mm

H - Height

View
4.81 Inch
122.17
mm

M - Length

0.69 Inch
17.53
mm

N - Height

0.38 Inch
9.65
mm

Block Thickness

1.00 Inch
25.40
mm

Rated Cv

View
0.20

Valve Options

Extreme Temperatures
Standard Autoclave valves with Teflon packing may be operated to 450°F (232°C). High temperature packing and/or extended stuffing box is available for service from 0°F (-17.8°C) to 650°F (343°C) by adding the following suffixes to catalog order number.†
TG standard valve with Teflon glass packing to 600°F (316°C).
GY standard valve with graphite braided yarn packing to 650°F (343°C).

† Autoclave Engineers does not recommend compression sleeve connections below 0°F (-17.8°C) or above 650°F (343°C). For additional valve options, contact your Sales Representative.

Valve Maintenance

Repair Kits:
add "R" to the front of valve catalog number for proper repair kit. (Example: R10V4071)

Valve Bodies:
Valve bodies are available. Order using the eight (8) digit part number found on the valve drawing or contact your Sales Representative for information.

Consult your Autoclave representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and Maintenance section for proper maintenance procedures.



 DOWNLOADS 

10V & SW Series Brochure
(PDF, 1343KB)

Technical Information
(PDF, 1052KB)

Tools & Installation Information
(PDF, 1782KB)



 Connection Components 


Gland
Low Pressure Connection Gland


Sleeve
Low Pressure Connection Sleeve

more available ..


Add To Cart Request Quote

2012©All Rights Reserved • Parker Autoclave Engineers • Erie, PA USA