CAD Cart (0)
  • Cart is empty

High Flow Cup-Type Line Filters are recommended in low pressure systems requiring both high flow rates and maximum filter surface area. Widely used in the industrial and chemical processing fields, the cup design offers as much as six times the effective filter area as compared to disc-type units. In addition, the filter elements can be quickly and easily replaced.

Materials: 316 Stainless Steel: Body, covers and gland nuts. Filter: 316L Stainless Steel.

Filter Elements: 300 Series Stainless Steel sintered cup. Standard elements available in choice of 5, 35 or 65 micron sizes. Note: Filter ratings are nominal.

Note 1: All filters furnished complete with connection components unless otherwise specified. All dimensions for reference only and subject to change.
For optional materials, see Technical Information.
Note 2: Autoclave Engineers disc and cup type filters are designed to filter small amounts of process particles. It is recommended that all fluids are thoroughly cleaned prior to entering the higher pressure system.
Note 3: Special material filters may be supplied with four flats in place of standard hex.
Note 4: Pressure differential not to exceed 1000 psi (69 bar) in a flowing condition.

The 1/16” Tubing System is a complete system for use with all 1/8” components for pressure to 15000 psi (1034 bar). Consult factory.

For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Unit of Measure

Pressure Rating

N/A 15000 psi1034.19 bar

Orifice

N/A 0.312 in7.92 mm

Micron Size

N/A 5

Connection Size and Type

N/A SW375

Effective Filter Element Area

N/A 0.81 in²522.57 mm²

A - Length

N/A 3.56 in90.42 mm

B - Length

N/A 3.00 in76.20 mm

C - Length

N/A 0.53 in13.46 mm

D - Typical Hex

N/A 0.75 in19.05 mm

HEX

N/A 1.00 in25.40 mm

Tubing Engagement Depth

N/A 0.75 in19.1 mm