Corporate Home
Search Catalog
      GO   
 All Categories    Low Pressure Tubing
View Cart View RFQs  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > High Pressure Fittings and Tubing > Low Pressure Fittings and Tubing > Low Pressure Tubing > Item # MS15-070  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Item # MS15-070, Low Pressure Tubing





Autoclave Engineers offers a complete selection of annealed, seamless stainless steel tubing designed to match the performance standards of Autoclave low pressure valves and fittings. Autoclave low pressure tubing is furnished in random lengths between 20 feet (6 meters) and 27 feet (8.2 meters). The average is 24 feet (7.3 meters). The tubing is available in five sizes and a variety of materials. In order to ensure proper sleeve “bite” into tubing, Autoclave Engineers specifies and controls the strength levels of both the tube and sleeve materials.

Inspection and Testing
Autoclave Engineers low pressure tubing is inspected for compliance with specified defect restrictions as well as carburization or intergranular carbide precipitation. The tubing outside diameter and wall thickness is controlled within close tolerance to assure proper fit. Sample pieces of tube (for each lot) are tested to confirm mechanical properties for proper compression sleeve “bite” and pressure capability. Furthermore, the sample tubes are pressure tested as a final check.

Special Materials
In addition to the type 316 and 304 stainless steel tubing listed in this section, Autoclave has a limited stock of hard-to-obtain shorter lengths of the following tubing materials:
Monel 400*, Inconel 600*, Titanium Grade 2*, Nickel 200*, Hastelloy C276* - (* Trademark names)

Please consult factory for stock available.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.





 Specifications   

Tube Materials

316SS

Fits Connection Type

W062

Outside Diameter Tube

1/16 Inch
1.59
mm

Tolerance/Outside Diameter

.064/.062 Inch
1.62/1.57
mm

Inside Diameter Tube

0.026 Inch
0.66
mm

Wall Thickness Tube

0.018 Inch
0.46
mm

Flow Area

0.0005 in²
0.32
mm²

Working Pressure at 0 - 100°F (-17.8 to 37.8°C)

View
15000 psi
1034.20
bar

Working Pressure at 200°F (93°C)

View
15000 psi
1034.20
bar

Working Pressure at 400°F (204°C)

View
14400 psi
992.83
bar

Working Pressure at 600°F (316°C)

View
13600 psi
937.67
bar

Working Pressure at 650°F (343°C)

View
12600 psi
868.73
bar



 DOWNLOADS 

Fittings and Tubing Low Pressure Brochure
(PDF, 826KB)


Add To Cart Request Quote

2012©All Rights Reserved • Parker Autoclave Engineers • Erie, PA USA