Corporate Home
Search Catalog
      GO   
 All Categories     Low Pressure Ball Check Valves
View Cart View RFQs  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > High Pressure Fittings and Tubing > Low Pressure Fittings and Tubing > Low Pressure Check and Excess Flow Valves > Low Pressure Ball Check Valves > Item # SWB8800  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Item # SWB8800, Low Pressure Ball Check Valves




Prevent reverse flow where leak-tight shut-off is not mandatory. When differential drops below cracking pressure, valve closes. With all-metal components, valve can be used up to 650°F (343°C). See Technical Information section for connection temperature limitations. (Not for use as a relief valve.)

Ball and poppet are an integral design to assure positive, in-line seating without “chatter”. Poppet is designed essentially for axial flow with minimum pressure drop.

Materials: 316 Stainless Steel: body, cover, cover gland, ball poppet. 300 Series Stainless Steel: spring

Minimum operating temperature for standard ball check valves -110° (-79°C).
For low temperature option to -423°F (-252°C) add suffix LT (Low temperature spring).

Caution: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf life may vary widely with differing service conditions, properties of reactants, pressure and temperature cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration, and O-rings replaced as required.

Caution: See Tubing section for proper selection of tubing.
Note: For optional material see Technical Information.

Note: All check valves are furnished complete with connection components unless otherwise specified.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.





 Specifications   

Fits Connection Type

SW500

Pressure Rating

View
10000 psi
689.46
bar

Orifice

0.375 Inch
9.53
mm

Rated Cv

3.40

A - Length

4.18 Inch
106.17
mm

B - Length

3.50 Inch
88.90
mm

C - Length

0.53 Inch
13.46
mm

D - Typical Hex

0.93 Inch
23.62
mm

HEX

1.38 Inch
35.05
mm


 MORE IMAGES 

·  Ball Check Valves Flow



 DOWNLOADS 

Fittings and Tubing Low Pressure Brochure
(PDF, 2867KB)

Technical Information
(PDF, 1008KB)



 Connection Components 


Gland
Low Pressure Connection Gland


Sleeve
Low Pressure Connection Sleeve

more available ..


 Low Pressure Tubing Section 


Tubing_Low
Low Pressure Tubing

Add To Cart Request Quote

2012©All Rights Reserved • Parker Autoclave Engineers • Erie, PA USA