Corporate Home
Search Catalog
      GO   
 All Categories    High Pressure Tubing
View Cart View RFQs  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > High Pressure Fittings and Tubing > High Pressure Fittings and Tubing > High Pressure Tubing > Item # MS15-209  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Item # MS15-209, High Pressure Tubing





Autoclave Engineers offers a complete selection of austenitic, cold drawn stainless steel tubing designed to match the performance standards of Autoclave valves and fittings. Autoclave high pressure tubing is manufactured specifically for high pressure applications requiring both strength and corrosion resistance. The tubing is furnished in random lengths between 20 feet (6 meters) and 27 feet (8.2 meters). The average is 24 feet (7.3 meters). High pressure tubing is available in five sizes and a variety of materials. Special longer lengths are available. Consult factory.

Inspection and Testing
Autoclave Engineer’s high pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are controlled within close tolerances. Sample pieces of tubing for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 100% hydrostatic testing at additional cost if desired.

Special Materials
In addition to the type 316 and 304 stainless steel tubing listed in this section, Autoclave has limited stock of hard-to-obtain shorter lengths of the following tubing materials in some sizes: Monel 400*, Inconel 600*, Titanium Grade 2*, Nickel 200*, Hastelloy C276* - (* Trademark names)

Please consult factory for stock availabilty.

Note:
1. Autofrettaged tubing available (see technical Information section: Pressure Cycling for Autofrettage information)
2. For HighPressure, High Cycle (HPHC) tubing, MS15-201, MS15-202, MS15-209, and MS15-210 are available. (See Technical Information section: Pressure Cycling for additional information)

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.





 Specifications   

Tube Materials

Stainless

Fits Connection Type

F562C40-312

Outside Diameter Tube

9/16 Inch
14.29
mm

Tolerance/Outside Diameter

.557/.552 Inch
14.15/14.02
mm

Inside Diameter Tube

0.312 Inch
7.92
mm

Wall Thickness Tube

0.125 Inch
3.18
mm

Flow Area

0.076 in²
49.03
mm²

Working Pressure at -325 to 100°F (-198 to 37.8°C)

View
40000 psi
2757.86
bar

Working Pressure at 200°F (93°C)

View
40000 psi
2757.86
bar

Working Pressure at 400°F (204°C)

View
38500 psi
2654.44
bar

Working Pressure at 600°F (316°C)

View
36100 psi
2488.97
bar

Working Pressure at 800°F (427°C)

View
33800 psi
2330.39
bar



 DOWNLOADS 

Fittings and Tubing High Pressure Brochure
(PDF, 1012KB)

Technical Information
(PDF, 1052KB)


Add To Cart Request Quote

2012©All Rights Reserved • Parker Autoclave Engineers • Erie, PA USA