CAD Cart (0)
  • Cart is empty
  • Actual Air to Liquid Pressure Ratio = 1:133
  • Volume Displacement per Stroke = 7.8 in³ (127.8 cm³)
  • Maximum Outlet Pressure = 13,300 psi (917 bar)
Unit of Measure

Specifications

Dual Piston Air Drive

N/A 10 in

Air to Pressure Ratio

N/A 1:133

Air Drive Pressure Range

N/A 20-110 psi1.4-7.6 bar

Maximum Outlet Pressure

N/A 13300 psi917 bar

Liquid Inlet Location

N/A Side

Isolation Chamber

N/A Included

Seal Material

N/A Thermoplastic

Volume Displacement per Stroke

N/A 7.8 in³127.8 cm³

Technical Data

N/A
Technical Data: Liquid Side Specifications

  • Service: Oil, Water or Water/Oil mixture and other fluids depending on material compatibility.
  • Maximum Outlet Pressure: 13,300 PSI (917 bar)
  • Pressure Ratio: 1:133
  • Isolation Chamber (prevents process contamination of air section): Standard
  • Volume Displacement Per Stroke: 7.8 in³ (127.8 cm³)
  • Dual Inlet Connections: 1/2" FNPT
  • Dual Outlet Connections: 1/2" FNPT
    (Contact Autoclave Engineers for Additional Options)
Technical Data: Air Side Specifications
  • Air Drive Pressure Range: 20-110 psi (1.4-7.6 bar). Maximum air drive pressure is limited by maximum output pressure.
  • Nominal air pressure required for 13,300 PSI (917 bar) output pressure is 100 psi (6.9 bar)
  • Inlet Port: 1" female FNPT
  • Pilot Port: 1/8" female FNPT
  • Exhaust Ports (mufflers removed): 1" female BSP
  • Air Consumption at 50 PSI air (0 PSI liquid): 290 SCFM
  • Prelubricated at Factory
General Specifications
  • Operating Temperature: 0-150º F (-18º to 65º C)
  • Net Weight: 160 lbs (73 kg)
  • Pressure Head: 15-5 PH Stainless Steel
  • Plunger: Stainless steel piston utilizing a proprietary multi-layer carbon based coating with diamond like carbon exterior layer 3 times the hardness of Stellite with a coefficient of friction equal to/less then PTFE.
  • Check Valve Glands: 15-5 PH Stainless Steel
  • Liquid Seal: See specification table.
  • Air Drive Seals: Buna N