CAD Cart (0)
  • Cart is empty
Safety Heads/Rupture Discs - Safety Heads and Rupture Discs offer an economical and dependable relief port to guard against system over-pressure.

Autoclave Engineers offers universal safety heads in three series compatible in orifice size and maximum pressure rating with Autoclave Low Pressure, Medium Pressure and High Pressure valves, fittings and tubing.

Autoclave Low Pressure Series SS: Autoclave SpeedBite Ermeto-type tube connection, maximum rupture pressures to 15000 psi (1034 bar).

Autoclave Medium Pressure Series CSX: Autoclave Medium-Pressure coned-and-threaded tube connection, maximum rupture pressures to 20000 psi (1379 bar).

Autoclave High Pressure Series CS: Autoclave High Pressure coned-and-threaded tube connection, maximum rupture pressure to 110000 psi (7584 bar).

The 3/16F style features a 3/16” blow-out diameter and a flat seat which can be ordered in pressure range from 200 to 27000 psi (13.8 to 1862 bar).

The 1/4A style features a 1/4” blow-out diameter and an angular seat which can be ordered in pressures from 900 to 60000 psi (62 to 4137 bar).

The 1/2F style features a 1/2” blow-out diameter and a flat seat which can be ordered in pressures from 500 to 10000 psi (35 to 690 bar).

ASME Safety Head - Autoclave now has an ASME Section VIII Div. 3 safety head assembly rated to 115000 psi (7929 bar). Contact the factory or your local sales representative for details and ordering information.

Materials and Features
  • Non-rotating double-cone plug design avoids galling and scoring of safety head or connection during installation. Reduces likelihood of leakage.
  • Interchangeable hold-down rings permit use of several different sizes and types of rupture discs in a single safety head. Accommodates discs with rupture pressures as low as 90 psi (6.2 bar) and ranging to 60000 psi (4137 bar) and above.
  • Installs in any standard Autoclave coupling, elbow, cross or tee.
  • Cold-worked Type 316 SS body hold down gland and plug, all series.
  • Hold down rings are corrosion resistant stainless steel.
Consult Local Sales Representative for safety head assemblies rated above 60000 psi (4137 bar).

Ordering Information
To order an Autoclave Universal Safety Head, use the catalog order number from table. ADD THE SIZE OF THE RUPTURE DISC YOU WANT AS A SUFFIX TO THE CATALOG NUMBER; SUCH AS CS6600-1/4A. Then order desired rupture discs from rupture disc section. (This is important since the disc size determines which hold-down ring will be furnished with the safety head.) Note: Plug is included.

Note: Interchangeable hold-down rings permit use of several different sizes and types of rupture disc in a single safety head.

Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.

All dimensions for reference only and subject to change.
For prompt service, Autoclave stocks select products. Consult your local representative.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Unit of Measure

Pressure Type

N/A Medium Pressure

Body Part Number

N/A 101A-1731

Plug Part Number

N/A 2010-7823

Hold-down Gland 3/16 & 1/2 Flat Part Number

N/A 1040-7434

Hold-down Gland 1/4 Angle Part Number

N/A 1030-0241

Fits Connection Type

N/A SF250CX

Fitting Pressure Rating

N/A 20000 psi1378.9 bar

Body Torque

N/A 15 ft·lb20.3 N·m

Plug Orifice

N/A 0.094 Inch2.39 mm

Body Orifice

N/A 0.141 in3.58 mm

Rupture Disc Size 3/16F Port E

N/A 0.188 in4.78 mm

Rupture Disc Size 1/4A Port E

N/A 0.25 in6.35 mm

Rupture Disc Size 1/2F Port E

N/A 0.50 in12.7 mm

C - Hex

N/A 1.00 in25.40 mm

D - Length

N/A 2.19 in55.63 mm